Kentix KSS-BASIC-2-B Instrukcja Obsługi Strona 39
- Strona / 76
- Spis treści
- BOOKMARKI
Oceniono. / 5. Na podstawie oceny klientów
Active power
The active power (P) shows the actual power of the PDU. Its calculated by multiplying voltage, current and
the power factor.
Apparent power
Total power of the PDU in volt ampere (VA). It results from the idle power and the active power.
Power factor
The power factor is the ratio between active power and apparent power. It indicates which part of the
apparent power is converted to the desired active power.
Energy consumption
Total energy consumption in kilowatt hours (kWh) since the start of the measurement. The consumption
values are stored in the MultiSensor-RACK and preserved even after a restart.
It can be reset in the configurations menu in the EnergySensor section.
Energy costs
Shows the actual costs for the energy consumption since the start of the measurement. The costs result
from the consumption and the configured price.
Output 1/2
Shows the actual state of the outputs (1 output per PDU on MultiSensor-RACK Revision 1, 2 outputs
Revision 2) for the PDUs power supplement of the end devices.
Reset alarms
Resets the display of Flicker-, Swell- and Peak-Alarms.
"
IMPORTANT!
To display the costs a price has to be entered in the configuration (section EnergySensor).
NOTE!
For actualization of the alarms Flicker, Swell and Peak a Retrigger time is configured which also avoids that
alarms are reported multiple times.
For the actualization / signalization of new alarms resetting the last alarms is not necessary.
Page (04-2015, subject to change) kentix.com39
- User-Manual 1
- 1. Introduction and summary 4
- 2.1. CompleteSet 1 5
- 2.2. CompleteSet 2 5
- KMS-Door 6
- 2.4. Alarm-inputs 7
- 2.5. Relay contacts 7
- 2.6. Power supply 7
- KENTIX system-components 8
- 4. AlarmManager-BASIC/PRO 9
- 4.4. Configuration in 8 steps 10
- 4.6. Alarm zones 12
- 4.7.Quitting Alarms 12
- 4.8. User accounts 13
- OK! ARM ZONE 123 14
- SMS command 14
- SMS answer 14
- Alarm behavior 15
- E-Mail, SNMP & GSM 15
- General Settings 15
- Network monitoring 16
- Network Cameras 16
- I/O Modules 16
- SMS alarm forwarding 16
- 4.12.SMS gateway function 17
- 4.13.MIB for SNMP-Systems 18
- 5. MultiSensors 22
- 5.3. MultiSensor-RF 23
- 5.4. MultiSensor-LAN 24
- Dashboard 25
- 5.4.6. Users 28
- 5.4.7. System 29
- 5.4.8. Switch alarm output 2 29
- 5.5.6. Profile description 34
- 5.5.7. Testing the settings 34
- 5.6. MultiSensor-Rack 35
- 5.6.3. Overview connections 36
- Configuration 37
- 5.6.6. EnergySensor - Energy 38
- 5.6.8. Control 41
- 5.6.10. Users 43
- 5.6.11. System 43
- KENTIX system jack 44
- 7. KeyPad 48
- 7.1.Operation KeyPad 49
- 8. Enhancements 50
- Description 55
- Application examples 55
- AlarmManager-BASIC/PRO 56
- Alarm sirene 56
- 8.6.1. Configuration 57
- 8.7. Kentix IO-Modules 58
- 9.1. The Profile menu 60
- 9.2. AlarmManager 60
- 9.3. SMS Control 61
- 10. Data sheets 62
- 10.8.Data sheet KeyPad (KKP) 69
- Function 74
- Place of installation 75
- 12. Support 76
Powiązane produkty i podręczniki dla Systemy alarmowe Kentix KSS-BASIC-2-B
(1 strony)Samsung WA10F5S5QWA/SP manuali
Manuali dei proprietari e guide per l'utente per Lavatrici Samsung WA10F5S5QWA/SP.
We fornisce 1 manuali pdf Samsung WA10F5S5QWA/SP per scaricare gratuitamente in base al tipo di documento: Manuale Utente
Komentarze do niniejszej Instrukcji